Technical Parameters
| Model | 100T | 125T | 130T | 140T | 160T | 200T |
| Motor/KW | 18.5 | 22 | 22 | 30 | 30 | 37 |
| Bin Size/cm | 100*70*35 | 110*70*40 | 120*80*45 | 130*100*50 | 160*120*50 | 200*180*90 |
| Steel plate thickness/mm |
20+12 | 20+12+25 | 20+12+25 | 20+30 | 20+30 | 20+30+40 |
| Bale Size/mm | 200*200*400 -500 |
250*250*500 -600 |
300*300*500 -600 |
250*250*600 -700 |
300*300*600 -700 |
500*500*600 -700 |
| Machine Size /mm |
2600*1800*1400 | 2800*1800*1400 | 3000*2000*1500 | 3300*2450*1800 | 3800*2850*1800 | 4900*3500*2800 |
| Downward pressure cylinder diameter (mm) |
140 | 140 | 140 | 180 | 180 | 200*2 |
| Rear push cylinder diameter (mm) |
200 | 220 | 220 | 245 | 245 | 230*2 |
| Side-push cylinder bore diameter (mm) |
220 | 250 | 250 | 300*1 | 300*2 | 350*2 |
| Diameter of the cylinder for removing the packagemm(mm) |
90 | 90 | 90 | 90 | 90 | 160 |
| Machine Weight/TONS |
2.6 | 2.9 | 4.5 | 6.2 | 8 | 16 |
| Cutting tools | Optional | Optional | Optional | Optional | Standard equipment |
Standard equipment |
| Cooling method | Optional | Optional | Optional | Optional | Air-cooled | Air-cooled |
| Model | 260T (Remote-controlled) |
315T (Remote- controlled) |
400T (Remote- controlled) |
Hydraulic Lift Gate Metal Baler |
Large-Scale Hydraulic Top-Lifting Door Metal Baler |
Car Body Crushing Machine |
| Motor/KW | 30*2 | 37*2 | 37*3 | 30 | 55*2 | 30*2 |
| Bin Size/cm | 250*180*100 | 250*200*100 | 300*250*100 | 1300*800*700 | 3600*2000*1100 | 5300*2500 |
| Steel plate thickness/mm |
20+30+40 | 20+30+40 | 20+30+40+60 | 12+18+40 | 20+30+40+60 | 20+30+40 |
| Bale Size/mm | 500*500*600 -700 |
500*500*800 -1000 |
500*500*800 -1000 |
Adjustable*800*500 | 1250*2000*1100 | //// |
| Machine Size /mm |
5800*3600*2800 | 5800*3800*2800 | 6700*5000*2800 | 3200*1500*2000 | 11500*3200*3500 | //// |
| Downward pressure cylinder diameter (mm) |
220*2 | 220*2 | 250*2 | 180 | 275*2 | 350*2 |
| Rear push cylinder diameter (mm) |
250*2 | 250*2 | 275*2 | 245 | 325*2 | //// |
| Side-push cylinder bore diameter (mm) |
400*2 | 450*2 | 510*2 | /// | /// | /// |
| Diameter of the cylinder for removing the packagemm(mm) |
160 | /// | /// | Hydraulic Lift Gate 160*2 |
Hydraulic Lift Gate 200*2 |
/// |
| Machine Weight/TONS |
27 | 37 | 48 | 6 | 45 | 26 |
| Cutting tools | Standard equipment |
Standard equipment |
Standard equipment |
Optional | Standard equipment | /// |
| Cooling method | Water-cooled | Water-cooled / Cooling tower |
Water-cooled / Cooling tower |
Optional | Water-cooled / Cooling tower | //// |
1. Product Overview
Our small horizontal scrap metal baler with hydraulic lift discharge door is specially designed for users who need horizontal compression effect and automatic discharging function with limited workshop space. The whole machine adopts horizontal single-cylinder hydraulic compression structure and integrated thickened steel plate welding body, featuring solid structure, strong pressure resistance and long service life. The core upgraded hydraulic lift discharge door system replaces traditional manual flip doors, realizing full hydraulic automatic control of door opening, discharging and resetting, which significantly improves working efficiency and operational safety.
Equipped with industrial PLC intelligent control system, the machine supports one-key automatic cycle of feeding, compression, pressure holding, door lifting, bale discharging and door closing. It solves the pain points of low efficiency, labor waste and easy material leakage of small vertical balers. The finished metal bales are high-density, neat and firm, convenient for stacking, container loading and secondary smelting. It is widely applicable for small-batch and frequent metal scrap compression and recycling.
2. Core Advantages of Hydraulic Lift Discharge Door
The unique hydraulic lift discharge door is the biggest upgrade and competitive feature of this small horizontal metal baler, bringing obvious advantages compared with conventional balers:
-
Fully Automatic Hydraulic Discharging: No manual door opening and bale taking. The hydraulic door automatically lifts up after compression, and the bale is pushed out smoothly, saving labor cost and improving continuous production efficiency.
-
No Bale Jamming & Smooth Ejection: The integral lift door opens completely without dead angle, thoroughly solving the problem of bale stuck caused by incomplete door opening of traditional rear door balers.
-
Better Sealing & Higher Bale Density: The hydraulic lift door fits closely with the bin body during compression, avoiding material leakage and pressure loss. The compression density is 20%-30% higher than ordinary small balers, ensuring tighter and heavier metal bales.
-
Long Service Life & Low Failure Rate: The hydraulic door is driven by independent hydraulic cylinder, with stable power and wear-resistant structure. No frequent manual collision and extrusion damage, reducing later maintenance frequency and cost.
-
Higher Safety Performance: Equipped with door body interlock protection device. The machine will stop compression automatically when the door is abnormal, effectively avoiding safety accidents caused by misoperation.
3. Key Product Features
-
Compact Horizontal Industrial Structure: Small overall size and reasonable horizontal layout, occupying less floor space, easy to place and move, suitable for small factories and narrow workshop environments.
-
Stable Hydraulic Compression System: Adopts high-precision hydraulic station and thickened compression cylinder, providing stable and powerful extrusion force. Fast compression speed and uniform pressure, ensuring consistent baling effect for various metal scraps.
-
Intelligent PLC Automatic Control: Simple HMI operation panel, supporting automatic and manual dual modes. One-key automatic cycle operation, no professional technical workers required, low learning cost.
-
Wide Material Compatibility: Suitable for various light and medium metal scraps, including iron filings, aluminum scraps, copper scraps, stainless steel scraps, metal cans, waste iron sheets and small hardware stamping leftovers.
-
Energy Saving & Low Noise: Optimized hydraulic loop design reduces invalid power consumption and oil temperature rise. Low-noise operation meets industrial environmental standards, suitable for long-time continuous work.
-
Reinforced Wear-resistant Bin: The compression bin is welded with thickened manganese steel plates, wear-resistant and impact-resistant, effectively avoiding deformation and damage caused by long-term metal extrusion.
-
Global Voltage Customization: Support 220V/380V/415V and other international standard voltages, adaptable to different country power environments.
4. Processable Materials & Application Scenarios
Main Processable Scrap Materials
-
Ferrous metal scraps: waste iron sheets, iron filings, iron cans, thin steel scraps
-
Non-ferrous metal scraps: aluminum scraps, copper scraps, aluminum alloy leftovers, metal pop cans
-
Industrial metal waste: small hardware stamping scraps, mechanical processing residual materials, stainless steel leftover materials
Applicable Industries
Small metal recycling stations, machinery manufacturing factories, hardware processing workshops, factory waste recycling departments, urban renewable resource recovery centers and small-scale scrap metal processing enterprises.
5. Technical Specifications
|
Item
|
Parameter
|
|
Product Name
|
Small Horizontal Metal Baler with Hydraulic Lift Discharge Door
|
|
Working Pressure
|
60Ton – 160Ton (Customizable)
|
|
Processing Capacity
|
1 – 3 Ton/Hour
|
|
Bale Size
|
Custom Small Horizontal Bale Size
|
|
Bale Density
|
1.0 – 1.4 t/m³
|
|
Control System
|
PLC Fully Automatic Hydraulic Control
|
|
Discharging Mode
|
Hydraulic Lift Door Automatic Ejection
|
|
Motor Power
|
11KW – 30KW
|
|
Machine Weight
|
2.5T – 6T
|
|
Working Mode
|
Automatic / Manual Switchable
|
|
Certification
|
CE / ISO Standard
|
6. Product Competitive Advantages
Compared with traditional small vertical metal balers and ordinary horizontal balers, our small horizontal hydraulic metal baler with hydraulic lift discharge door has comprehensive practical advantages. Vertical balers have low compression density and small feeding size, unable to process slightly large metal scraps. Ordinary horizontal balers adopt manual door opening, which is labor-intensive and low in efficiency, and easy to cause bale jamming.
This upgraded model integrates horizontal high-density compression and fully automatic hydraulic lift door discharging functions. It not only retains the advantage of large feeding size and high compression density of horizontal balers, but also solves the pain points of difficult discharging and high labor cost. With compact body, low investment cost and high production efficiency, it is the most cost-effective small metal baler for medium and small recycling enterprises to upgrade processing equipment.
7. Packaging, Shipping & After-sales Service
Export Packaging & Delivery
The whole machine adopts standard export fumigation-free wooden box or steel frame packaging, with multi-layer waterproof, moisture-proof and rust-proof protection. Internal fixed shockproof design ensures no damage during long-distance sea and land transportation. We support global mainstream trade terms such as FOB, CIF, DDP, EXW, providing one-stop packaging and shipping services.
Professional After-sales Support
-
18-month full machine warranty and lifelong free technical support
-
24/7 global online remote debugging and operation guidance
-
Free operation manuals, video tutorials and parameter configuration files
-
Overseas equipment installation, commissioning and staff training services
-
Long-term preferential supply of original hydraulic and electrical spare parts
8. FAQ
Q1: What is the biggest feature of this metal baler?
A1: The core feature is the hydraulic lift discharge door automatic discharging system. It realizes fully automatic door opening and bale ejection without manual operation, with smooth discharging, no jamming and higher baling density than ordinary small balers.
Q2: What kinds of metal scraps can this horizontal baler process?
A2: It is suitable for all kinds of light and medium ferrous and non-ferrous metal scraps, including iron scraps, aluminum scraps, copper scraps, stainless steel scraps, metal cans and thin iron sheets, meeting daily processing needs of small recycling plants.
Q3: Is the hydraulic lift door easy to maintain?
A3: Yes. The hydraulic lift door adopts independent hydraulic drive and modular structure, with stable performance and low failure rate. Daily maintenance is simple, only regular oil inspection and cleaning are required, saving maintenance time and cost.
Q4: Can the machine work continuously for a long time?
A4: Absolutely. The optimized heat dissipation hydraulic system and reinforced steel body support long-term uninterrupted industrial operation, fully adapting to daily intensive production of small and medium-sized recycling workshops.
Professional Manufacturer of Small Horizontal Metal Baler with Hydraulic Lift Door
We are a professional hydraulic baler manufacturer with more than 10 years of R&D and export experience in metal recycling machinery. All our hydraulic lift door horizontal metal balers pass CE and ISO international certifications, with stable industrial-grade quality, reasonable factory direct price and complete after-sales system. We focus on providing efficient, energy-saving and automatic small-scale metal recycling equipment for global customers. If you are looking for high-quality mini horizontal scrap metal compactor, welcome to contact us for free technical parameters and customized quotation!
